A real person answers 24/7Same-day serviceAZ ROC #34196624/7 · Call or text (602) 999-2770
(602) 999-2770
Menu
Home
Services
All services

Panels and wiring

Panel upgradesBreaker replacementWhole-house rewiringAluminum wiring replacementElectrical wiringNew and dedicated circuits

Repairs and safety

Electrical troubleshootingElectrical repairs24-hour electricianElectrical inspectionsOutlets, GFCI and AFCISmoke and CO detectorsWhole-home surge protection

Lighting and fans

Recessed and indoor lightingLED lightingLighting repairsCeiling fansLandscape lightingSecurity lightingLow-voltage lighting

Power, pool and remodels

EV charger installationGenerator hookupsPool, spa and hot tub wiringPool light installationRemodels and custom homes

Commercial

Commercial electricianTenant improvementsIndustrial controls
Service Areas
All service areas

The Sun Cities

Sun CitySun City WestSun City Grand

West Valley

SurpriseEl MirageYoungtownPeoriaGlendaleLitchfield ParkWaddell
GuidesAboutContact

Home / Services / Pool Light Installation

Pool Light Installation

Pool light installation in Sun City and the West Valley

A pool or spa light lets you see the steps, the edges and the water after dark. We install and replace pool and spa lights with the protection a light under water requires, and you hear the price before we start.

(602) 999-2770
Request a call back
5.0 on Google · 73 reviews
Is it time?

Common pool and spa light jobs

If any of these sound familiar, call and describe it. We will tell you honestly whether a new panel is the answer.

  • A pool light that stopped working
  • Water or fog inside the pool light lens
  • Replacing an old pool light with LED
  • Adding light to a spa so the steps are easy to see
  • A pool light that trips the breaker or GFCI
  • A pool light switch or timer that no longer works
A tingle in the water is a reason to get everyone out right away. Keep people out, turn off the pool light breaker if you can do it safely and call us.
Sun City and the West Valley

Pool lights in West Valley homes

A pool light sits under water in a sealed fixture, with its cord running back through a pipe to a box near the pool. Over the years seals wear, lenses cloud and water can get in. The Arizona sun and pool chemicals are also hard on the parts above the water.

Because the light sits in water people swim in, protection matters as much as the light. When we replace or add a light, we check the ground fault protection, the bonding that ties metal parts together and the connections in the box, not just the bulb. Circuits for pumps, heaters and hot tubs are covered on our pool and spa wiring page.

Ask about your panel
What’s included

What a pool light job includes

Power off and confirmed

We shut off the circuit and confirm it is off before any work near the water.

The right fixture

A light made for underwater use and for the opening it sits in.

Ground fault protection

We check and test the protection on the light circuit.

Connections and seals

The box, the connections and the fixture seals checked so water stays out.

A clear quote

You hear the price before we start. The trip and diagnostic fee depends on distance.

Two-year warranty

Two years on all labor and material we provide.

How it works

From first call to finished panel

1

Call or text

A real person answers. Tell us about the pool or spa and the light.

2

We look and quote

We check the light, the box and the protection on the circuit, then give you a clear price.

3

We install the light

Licensed, insured work under AZ ROC #341966, tested with the protection working.

4

You’re covered

A pool you can see at night, and a two-year warranty.

Start with a call
A real person answers, day or night.
Questions

Panel upgrade questions

Can you work on a pool light that is already installed?

Yes. Tell us what the light is doing and we will tell you what it likely needs. We look at the fixture and its circuit before recommending a repair or a replacement.

Can my old pool light be changed to LED?

Usually, yes, as long as the new light is made for the opening in your pool wall. We check the fit before we recommend one.

Why does my pool light trip the GFCI?

Often water has gotten into the fixture or a connection has worn. Do not keep resetting it. We test the light and the circuit and find the cause.

Do pool lights need special protection?

Yes. Lights in water need ground fault protection and proper bonding. We check both whenever we work on a pool light.

How much does pool light installation cost?

It depends on the light, the pool and the condition of the wiring and box. We look first and give you a clear price before any work starts.

Do you warranty pool light work?

Yes. Two years on all labor and material we provide.

Have a question about your panel?Call and ask. A real person answers, day or night.
(602) 999-2770
Learn more

Guides and answers

Hot Tub Wiring Requirements

A hot tub combines water and electricity, so the wiring has to be done carefully. Most need a dedicated circuit, GFCI protection, a nearby…

Read the guide

How Do I Reset a GFCI Outlet?

Unplug everything on the outlet, then press the RESET button firmly until it clicks. If it will not reset, look for another GFCI that may…

Read the answer
Related

More from Solana Electrical

Pool, spa and hot tub wiring

Circuits for spas and pool equipment

Learn more

Outlets, GFCI and AFCI

Protection for outlets near water

Learn more

Landscape lighting

Path, garden and wall lights around the yard

Learn more

Talk to a real person now

Sun City, Sun City West, Sun City Grand, Surprise, El Mirage and Peoria. Call or text any hour.

(602) 999-2770
Text us
  • A real person answers any hour
  • You hear the price before we come out
  • 2-year warranty on labor and material

Rather we call you?

Leave your number and we will call you back within a few hours.

Prefer to talk now? Call (602) 999-2770